I actually have used your filament to print today, instead of 240c I ran it at 210c and instead of bed temp at 100c I ran at 85. I also slowed down my print speed by 50% (15mms) and have no issues. Prints just like the filament provided by the maker ...
Hey, today i just tested the amazing PETG from Suntop Filaments.Diameter is 1.75 +-0,1 à nice flowrate at 1,05 .PETG needs just a little bit more flow!I print the filament with a Heat bed at 60 degrees and 230 at the nozzle.I really like PETG, it is ...
After I reallised that I really need something for scratch marks for the wood I just bought the TPU from Suntop as well.Before I start printing with the TPU, I have to make some upgrades for my Extruder with Teflon tubes inside. You will need it, oth...
i had the opportunity to test your filaments, please see the pictures attached. Those are some of the tests we made, also some payed works we already have like those keychains, we were ordered 100 keychains for an opening petshop. I must say that the...
I used your green for my mermaid shower head and it turned out great! Attached is a little video of my prototype, I’m working with the designers to perfect it so we can launch it ASAP! Mike Berger, Mar.13,2018...
This is a virtually flawless Tevo Tornado control box housing for an MKS board and touch screen. It’s printed at 0.25mm resolution at 60 mm/s and 220 deg C on a Tevo Tornado using Suntop carbon fibre PLA. I can’t be more impressed with this filament....
SunTop 1.75mm PLA Glow in the Dark Filament Review by Lydia Streccius It’s done! i had lots of fun printing with this and I am definitely going to be printing with this amazing filament a lot more.I think I’m going to print some bionic arms for litt...
